Greater Houston Roofers Request an inspection

Tool

Five inch, six inch, and the number that actually matters

Most overflowing gutters are not undersized. They are under-drained, back-pitched, or full.

Your answers

The plan area under the roof, not the sloped surface area.

On a slab foundation over clay soil, this matters as much as the size of the trough.

This works out an answer as you change the controls, which needs JavaScript. Without it, the reference section below covers the same ground, and we are happy to talk it through.

Why downspouts matter more than size

A gutter is a holding trough on the way to a downspout. Once water arrives faster than the outlets can take it away, the trough fills and the surplus goes over the front edge regardless of whether it is five inches or six. Adding an outlet is usually cheaper and always more effective than replacing a run.

  • Put outlets at the ends of runs, and add one wherever a valley discharges into the gutter.
  • A valley concentrates two planes of water into a few feet of trough. That is the spot that overflows first.
  • Downspouts need somewhere to go. A downspout discharging against the slab repeatedly wets and dries the clay under one corner of the house, and that soil moves.
  • Check the pitch of the run. Gutters hung flat or back-pitched hold water, and standing water is what pulls a run off a fascia.

The drawing below puts the two K-style sizes, the half-round profile and the two downspout sizes beside one another at the same scale.

Gutter and downspout sizes Side-by-side cross-sections of 5-inch K-style, 6-inch K-style and 5-inch half-round gutters with 2x3 and 3x4 downspout openings drawn to relative scale. Gutter size follows how much roof drains into one run,not how big the house looks. 5 in.5-inch K-styleStandard on most homes6 in.6-inch K-styleAbout 40% more capacity than 5-inch.Worth it on steep, large orvalley-heavy roofs5 in.5-inch half-roundTraditional look, carries lessthan a K-style of the same widthDownspouts2×33×4A 3×4 opening is twicethe area of a 2×3, andpairs with 6-inch gutter G2Gutter and downspout sizesIllustrative, not to scale Open full size

When the answer is not a bigger gutter

What you seeWhat it usually isWhat fixes it
Overflow at one spot every timeA valley discharging into a run with no outlet near itAn outlet where the water arrives
Overflow along the whole runToo few downspouts, or blocked onesMore outlets, or clearing the ones you have
Water behind the gutterMissing or reversed drip edgeCorrect edge metal at the eave
A sagging runA rotten fascia that will not hold a spikeCarpentry first, gutter second
Water pooling at one corner of the slab after every stormA downspout discharging against the houseAn extension or a buried line that finishes well clear of the foundation
A buried line that backs up out of the top of the downspoutThe underground run is blocked or collapsedClearing or replacing the line; the gutter above it is not the problem

Sizing is half the question on a Gulf Coast house. The other half is where the water goes once the gutter has caught it: most of this metro sits on a slab over clay that shrinks and swells with moisture, and a downspout soaking the same corner of the foundation every time it rains is doing more damage than an overflowing trough would. Get the discharge clear of the house before spending anything on a bigger gutter.

Gutters, fascia and drip edge are one system, and they are usually diagnosed together.

Have them looked at

All work is performed by insured local roofing professionals.

SheetTool
Service areaGreater Houston and the Texas Gulf Coast
Last reviewed24 September 2026